RX Series Multi Directional

With a number of different modes including spin, transverse and diagonal, these forklifts allow easy manoeuvring in confined spaces and where tight cornering is necessary.

Product Features

  • 360 degree multi-directional, free to travel anywhere you want
  • Standard / spin turn mode - The ability to pivot around the center of the chassis allows on-the-spot changes of direction.
  • Transverse mode - Provides stable sideways travel, which is ideally suited for transporting elongated loads.
  • Extra standard / righ angle turn mode - The mode enables a pivot around the side of the chassis, allowing easy maneuvering in tight 90 degree turns.
  • Diagonal mode - The mode facilitates loading operations that require various changes in angle over short travel distances.
  • Pedal incorporating a presence switch
  • Safety Cruise - After temporarily stopping on an incline and releasing the brake, the vehicle will descend only at very low speed until the accelerator is applied and travel is easily resumed.
  • Passowrd Entry Sytem (Option)
Model
load capacity
load center
overall width
overall length
overall height
Operating Aisle Width
J-2R1-L10MU
1000 kg
500 mm
1250 mm
1940 mm
1995 mm
1525 mm
J-2R1-L12MU
1200 kg
500 mm
1250 mm
1940 mm
1995 mm
1525 mm
J-Y2R1-L12MU
1200 kg
500 mm
1250 mm
1940 mm
2495 mm
1525 mm
J-2R1-L14MU
1400 kg
500 mm
1250 mm
2030 mm
1995 mm
1555 mm
J-Y2R1-L14MU
1400 kg
500 mm
1250 mm
2030 mm
2495 mm
1555 mm
J-2R1-L15MU
1500 kg
500 mm
1250 mm
2030 mm
1995 mm
1555 mm
J-Y2R1-L15MU
1500 kg
500 mm
1250 mm
2030 mm
2495 mm
1555 mm
J-2R1-L18MU
1800 kg
500 mm
1250 mm
2105 mm
1995 mm
1555 mm
J-Y2R1-L18MU
1800 kg
500 mm
1250 mm
2155 mm
2495 mm
1590 mm
J-2R2-L20MU
2000 kg
500 mm
1390 mm
2210 mm
2050 mm
1655 mm
J-Y2R2-L20MU
2000 kg
500 mm
1390 mm
2210 mm
2550 mm
1655 mm
J-2R2-L25MU
2500 kg
500 mm
1390 mm
2210 mm
2050 mm
1655 mm
J-Y2R2-L25MU
2500 kg
500 mm
1390 mm
2250 mm
2550 mm
1655 mm